During normal production in the factory, we must always be vigilant to prevent open flames from filtering into the dust collector box. When a high temperature (generally referred to as ℃) suddenly occurs in the smelting boiler gas pipeline, we must quickly open the air outlet of the pipeline. The insert plate poppet valve should also close the air inlet of the bag dust collector to protect the dust collector equipment and prevent filter bag burning.
Precautions and measures for the low temperature phenomenon of filtered gas:
When the production boiler is started to ignite or is operated at low load, it usually occurs most in winter or in remote cold areas. The temperature of the combustion gas will be relatively high. Condensation will sometimes occur when low gas passes through the pulse dust collector pipe. When the minimum temperature of the flue gas is close to ℃, our preset control system on the bag dust collector will remind us that the temperature is too low. At this time, we can The ash grinding and powder spraying equipment is used to absorb condensation dust in the pipeline with alkaline powder to prevent condensation. At the same time, the bag of the dust collector equipment is protected from acidic corrosion. At the same time, the bag dust collector can adjust the boiler when used in conjunction with a large boiler. The outlet air temperature is used to increase the gas temperature. If condensation does not occur, the operating temperature of the dust collector must be controlled to be higher than the dust temperature and dew condensation occurs.